Welcome to Ivy Metering!
No Distributor or middleman, Factory-Direct!!!
MID Energy Meter
LoRaWAN Electricity Meter
EV PV Energy Meter
Lorawan Energy Meter
RS485 Modbus Meter
DC Energy Meter
Wifi Energy Meter
GPRS Electricity Meter
Prepaid STS Meter
Bidirectional energy meter
Industrial Area
EV Charging
Solar Energy Metering
LoRaWan Smart Metering
Smart Home
Culture
News
Qualification
2016-2017
2018-2019
2020-2021
2022-2023
2024-2025
Technical Support
FAQ
Lorawan Energy Meter & Antennas
Lorawan energy meters are also known as:Lorawan electricity meter, lorawan power meter, Lorawan smart energy meter etc. LoRaWAN is a Media Access Control (MAC) layer protocol built on top of LoRa modulation. so we can say we build our Lorawan energy meter based on LoRa technology.
Frequency Band & LoRaWAN Meter
LoRaWAN specifies 10 regional parameter standards (LoRa node development - LoRaWAN parameter standards in different regions), but some countries or regions have more than one ISM band, so multiple regional parameter standards can be used in some countries or regions. The available frequency bands in some countries or regions are as follows:
MID & Eichrecht - compliance of EV chargers
Note that so-called 'PTB compliant' chargers actually comply with the German calibration law (Eichrecht). Eichrecht = compliance with MID + “customer protection”: the customer must be able to check charge session data hours/days/months after the actual session...
What is the difference between M-Bus and MODBUS communication ?
M-Bus Communication: M-Bus is a communication protocol used between meters and the central data collection system or Pre-Payment unit. Widely used on new projects where the building infrastructure can be designed accordingly.M-Bus is available on a wide variety of gas, heat, electricity, and cold/hot water meters.
What is Four Quadrant Metrology?
P—active energy; Q—reactive energy; QL—inductive reactive energy; QC—capacitive reactive energy; S—apparent power Forward active power: P=UICOSΦ, where the range of Φ is within ±90°. Reverse active power: P=UICOSΦ, where Φ ranges from 90° to 270° Forward reactive power: P= UISINΦ, where the range of Φ is within 0~180°...
What are the differences between RS232, RS485, RS422 and RJ45 interfaces
RS-232, RS-422 and RS-485 are serial data interface standards.
No Distributor or middleman, Factory-Direct!!!
